Pt100 Outdoor / Cold Store Temperature Sensors - Type PRT

Change Currency

SKU
XE-3673
£104.50 £87.08
Lead Time:
Select Options
Tariff Code:
90330000
Country of Manufacture:
GB
RoHS Compliant:
Product Compliance:

Single element (XE-3673-001):

Single 4 wire element, allowing connection to any Pt100 2, 3 or 4 wire instrument

Dual element (XE-3674-001):

Duplex 2 x 4 wire with two independent sensing elements, allowing connection to two measurement or control devices; alternatively one sensor may be used as a primary and the other as a back up, eliminating the need to remove and replace the probe if one of the sensors should fail – can be connected to any Pt100 2, 3 or 4 wire instrument

Single element with 4-20mA output (XE-3675-001):

Includes integral transmitter which converts the Pt100 sensor output to a standard industrial 4 to 20mA output signal over pre-configured range of -50 to +150°C. It is also configurable by the user allowing range and burnout direction to be changed. It also allows the user to trim output current at either 4 or 20mA

Specifications

Sensor type:

  • Pt100 (100 Ohms @ 0°C) to IEC 751, Class B
  • XE-3673-001: 4 wire single element
  • XE-3674-001: 2 x 4 wire dual element
  • XE-3675-001: 3 wire single element with transmitter, 4-20mA 2 wire current loop output, default range -50 to +150°C (other ranges can be scaled/configured by user, 25°C minimum span - further transmitter specifications below)

*Note – transmitter device has an ambient operating range of -40 to +85°C

 

General Description Weatherproof IP67 rated wall mounting Pt100 for accurate outdoor air temperature sensing
Sensor Type Choice of either single or dual element, or single element with 4-20mA output
Housing Painted Die-Cast Aluminium Housing L80 x W74 x H54mm
Element Pt100, class B to IEC 751
Sheath Material Perforated 316 stainless steel probe, 12.7mm x 75mm
Gland M20 cable entry gland
Max. Temperature +150°C
Min. Temperature -50°C
IP Rating IP67
Transmitter Optional
Number of Wires 2 or 4

Labfacility - Company Overview Presentation

Labfacility - Company Video Presentation featuring, Mineral Insulated Cable Preparation, In-House Welding, Thorough Inspection from our Quality Department, Thermocouple Cable reeled to correct spool lengths, Dedicated work stations for the various sensor configurations, Calibration Test room and Large quantities kept in stock for fast despatch.