L60 Thermocouple & Fine Wire Welder with full accessory kit

L60 Thermocouple & Fine Wire Welder with full accessory kit

Details

L60 Thermocouple & Fine Wire Welder 

The Thermocouple Welder, manufactured by Labfacility, is a compact, simple-to-use instrument designed for thermocouple and fine wire welding.

It is primarily designed for use by sensor manufacturers to produce commercial grade thermocouple junctions; it is ideal for producing large numbers of exposed junction thermocouples for test and development laboratories. The L60 Thermocouple Welder is ideally suited to transducer and RTD extension lead attachment.

Use of the Thermocouple Welder does not require special skills and most operatives will be capable of producing quality work with little practice. The instrument is supplied with a full range of user accessories including a footswitch.

Suitable for use with wires of up to 1.1mm diameter an argon gas shield facility is included but a satisfactory thermocouple junction is produced without the need for argon. The output energy of the L60 Thermocouple Welder can be varied up to 60 Joules.

  • Simple to use Thermocouple Welder
  • Designed for the production of commercial grade thermocouple junctions
  • Also suitable for other fine wire work
  • Front panel or footswitch operation
  • Argon gas shield facility

Supplied complete with the following accessories:

  • Wire Holding Pliers & Lead
  • Safety Glasses & Magnifying Eyeglass
  • Argon Hose
  • Carbon Electrodes
  • Spare 2A Fuse & Mains Lead
  • Footswitch for greater ease of use
  • Welder Pen & Plate
  • Impact Clip

*** See specifications tab for full details ***

General Description The Thermocouple Welder, manufactured by Labfacility, is a compact, simple-to-use instrument designed for thermocouple and fine wire welding.
Dimensions 220mm (W) x 120mm (H) x 250mm (D)
Power Consumption Max 170VA dropping to 20VA during charging
Power Supply 110-120 Vac or 220-250 Vac, 50-60Hz
Standards Met CE
Energy Output 0-60 Joules
Duty Cycle Minimum 5-10 welds/min
Welding Capacity Wires up to 1.1mm diameter
Maintenance Apart from keeping the electrode in good order, no other maintenance is required.
Accessories Supplied complete with the following accessories: Wire Holding Pliers & Lead / Safety Glasses & Magnifying Eyeglass / Argon Hose / Carbon Electrodes / Spare 2A Fuse & Mains Lead / Footswitch for greater ease of use Welder Pen & Plate, Impact Clip also included.
GBP EUR USD JPY
Excl. VAT: £1,025.00 Incl. VAT: £1,230.00
Labfacility Part No:
XE-6101-001
Lead Time:
In-Stock
Tariff Code:
8515190000
Product Code
L60 Welder
Manufacturer:
Labfacility
Country of Origin:
United Kingdom
RoHS Compliant:
Product Enquiry
Trustpilot