RTD Temperature Sensor with Integral Transmitter & Hirschmann Connector
Change Currency
A cost effective 6mm diameter Pt100 sensor and transmitter assembly housed in a 316 Stainless Steel body with 1/2" BSP process connection and fitted din connector with connection lead.
PC configuration allows the user to select range, units and burnout direction without requiring calibration equipment. Configuration is performed quickly using the optional USB port driven configuration kit by simply connecting two clips to the transmitter loop terminals and following the software instructions.
Calibration set up may be saved as a file on the PC for later use. If required, the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be shipped with the default range of 0 - 100 °C.
Link To Product configuration software
USB configuration kit
The USB configuration kit provides a link between the USB port of your PC or Lap-Top and your product that use loop communication. The product, as well as the configurator, is powered during configuration from your PC's USB port so no additional power supply is needed during the configuration process.
| General Description | RTD Temperature Sensor with Integral Transmitter |
|---|---|
| Sensor Type | PT100 Class A |
| Minimum Span | 25°C *1 |
| Process Connection | 1/2" BSP |
| Probe Diameter | 6.0mm |
| Probe Length | 50mm, 75mm, 100mm, 150mm, 200mm and 300mm lengths available below hex |
| Cable Length | 1m |
| Cable Type | PVC Insulated |
| Max. Temperature | +250°C |
| Min. Temperature | -50°C |
| Standards Met | EMC: BS EN 61326. Ingress Protection: BS EN 60529. RoHS Directive 2011/65/EU |
| IP Rating | IP65 |
| Connector Type | Hirschmann |
| Connection Type | DIN connector Screw terminal |
| Ambient Temperature | Operating / Storage: -40° to 85°C (full accuracy only between -30° to 75°C) |
| Ambient Humidity | Operating / Storage: 10 - 90 %RH non-condensing |
| Loop Supply | 10 - 30 V DC |
| Output Details | 2 Wire Current (4 to 20) mA |
| Configuration Software | www.status.co.uk/software.html |
| Configuration Device | USB-CONFIG-MKII (XE-6267-001) |
