- DUAL CHANNEL VERSION
- DIRECT USB CONFIGURATION
- (4 TO 20) MA LOOP OUTPUT
- WALL MOUNT VERSION
- SWITCH TO SELECT PRE-CONFIGURED RANGES FOR DUAL
- CHANNEL VERSION
- RH, TEMPERATURE, DEW POINT AND DELTA TEMPERATURE
- MEASUREMENT SELECTION
The SEM160i is a low cost dual channel RH and temperature transmitter for industrial and BMS/HVAC applications.
Ths dual channel ( two wire (4 to 20) mA )version has a thermistor mounted in the sensor tip for direct temperature sensing by the users.
A USB HID interface is provided for user configuration using USBSpeedLink configuration software, allowing the user to select signal
source and range for each channel.
The dual channel version has four switch set ranges for easy onsite configuration. The four ranges can be programmed individually to
the customer’s requirement off site via the configuration software.
Single point alignment is provided for both temperature and humidity ranges.
The configuration software also provides data readings together with a basic logger function for diagnostics.