Status SEM710/B - 2 x Side Entry Universal Temperature Transmitter with Display

Change Currency

SKU
XE-6263-001
£141.48 £117.90
Lead Time:
In-Stock
Weight:
500g
Tariff Code:
90330000
Manufacturer:
Status
Country of Origin:
GB
RoHS Compliant:
Type Case Type Base Entry Side Entry 1 Side Entry 2
SEM710 2 x side entry (B) N/A (00) 1/2" BSP (BP) M20 (20)

SEM710 / B / 00 / BP / 20

 

  • ISOLATED PT100, mV AND THERMOCOUPLE
  • INPUTS
  • DISPLAYS TEMPERATURE IN °C/°F OR OUTPUT
  • CURRRENT mA
  • SIMPLE CONFIGURATION VIA USB PORT
  • PUSH BUTTON USER TRIM
  • (4 to 20) mA TWO WIRE OUTPUT

The SEM710 is a head mounted temperature transmitter with display feature, from Status Instruments. It has been designed to accept most common temperature sensor inputs and provide the user with a standard two wire (4 to 20) mA output signal. Isolation is provided between input and output and all temperature ranges are linear to temperature. The display provides the user with instant information of the loop condition at the point of measurement. It comes housed in our SCH4 ABS plastic connector head.

Designed for ease of use, a USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM710 and your PC, using the below free configuration software.

 

Product configuration software

 

DISPLAY OPTIONS

The SEM710 can be programmed to display in either °C or °F. As a diagnostic function the SEM710 can also be set to display the mA retransmission current.

OUT OF RANGE WARNING

If the input temperature goes above the high range value, the output current will drive to its maximum capability, however the display will continue to show the correct input temperature and signal by flashing an over-range warning on the display. This works for an under-range input value reading as well.

TEMPERATURE TRANSMITTER COMPATIBLE

The SEM710 has space inside its housing to mount a standard 33 mm centre, head mount, (4 to 20) mA temperature transmitter.

Any of the Status Instruments range of temperature transmitters can be used with the SEM710 to give a second (4 to 20) mA output for duplex style probes.

STABILITY

The SEM710 head mount temperature transmitter with display incorporates the latest digital technology to ensure accurate, low drift performance.