- Accepts any DC Voltage Input Between -10 and 100VDC
- Loop Powered 4 to 20 mA Output
- Can be used as adder or subtractor
- High Accuracy
- Galvanic Isolation
The SEM1015 is a (4 to 20) mA loop powered isolator that can be configured to accept voltages between -10 and 100V DC.
The voltage range can be specified at time of order, but if required the user may re-range the transmitter to a new range.
The isolator is housed inside a 12.5mm wide plastic enclosure, suitable for DIN Rail mounting. Screw terminals are provided for wire connections.
The enclosure provides side entry access to coarse offset and span adjusters and a range select switch.