RTD Temperature Sensor with Integral Transmitter & Hirschmann Connector

Change Currency

£150.84 £125.70
Lead Time:
7 - 10 working days
Tariff Code:
Country of Manufacture:
RoHS Compliant:
Product Compliance:

A cost effective 6mm diameter Pt100 sensor and transmitter assembly housed in a 316 Stainless Steel body with 1/2" BSP process connection and fitted din connector with connection lead.

PC configuration allows the user to select range, units and burnout direction without requiring calibration equipment. Configuration is performed quickly using the optional USB port driven configuration kit by simply connecting two clips to the transmitter loop terminals and following the software instructions.

Calibration set up may be saved as a file on the PC for later use. If required, the desired range can be specified at the time of order, removing the need for user configuration. If the range is not specified then the transmitter will be shipped with the default range of 0 - 100 °C.

Link To Product configuration software


USB configuration kit

The USB configuration kit provides a link between the USB port of your PC or Lap-Top and your product that use loop communication.  The product, as well as the configurator, is powered during configuration from your PC's USB port so no additional power supply is needed during the configuration process. 

USB configuration kit


General Description RTD Temperature Sensor with Integral Transmitter
Sensor Type PT100 Class A
Minimum Span 25°C *1
Process Connection 1/2" BSP
Probe Diameter 6.0mm
Probe Length 50mm, 75mm, 100mm, 150mm, 200mm and 300mm lengths available below hex
Cable Length 1m
Cable Type PVC Insulated
Max. Temperature +250°C
Min. Temperature -50°C
Standards Met EMC: BS EN 61326. Ingress Protection: BS EN 60529. RoHS Directive 2011/65/EU
IP Rating IP65
Connector Type Hirschmann
Connection Type DIN connector Screw terminal
Ambient Temperature Operating / Storage: -40° to 85°C (full accuracy only between -30° to 75°C)
Ambient Humidity Operating / Storage: 10 - 90 %RH non-condensing
Loop Supply 10 - 30 V DC
Output Details 2 Wire Current (4 to 20) mA
Configuration Software www.status.co.uk/software.html
Configuration Device USB-CONFIG-MKII (XE-6267-001)