Lascar EL-USB-TC-LCD, K, J & T Type Thermocouple USB Data Logger with LCD
Change Currency
K, J, and T-type Thermocouple Temperature USB Data Logger with LCD
- -200 to +1350°C K-type range
- -200 to +1190°C J-type range
- -200 to +390°C T-type range
- Immediate, delayed and push-to-start mode
- High contrast LCD shows last, high and low stored readings
This standalone data logger measures and stores over 32,000 temperature readings from either a K, J or T type thermocouple.
The thermocouple is attached via the thermocouple socket at the base of the unit. The user can easily set up the logger and view downloaded data by plugging the module into a PC's USB port and using the supplied software. Data can then be graphed, printed and exported to other applications.
EasyLog USB is compatible with the following 32bit and 64bit operating systems (other operating systems
are currently not supported):
- Microsoft Windows 7
- Microsoft Windows 8.1
- Microsoft Windows 10 (32bit and 64bit)
The high contrast LCD can show several different temperature variables. The user can cycle between these using the push button. The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 1 year.
| General Description | This standalone data logger measures and stores more than 16,000 temperature readings over a -35 to +80°C (-31 to +176°F) range with a resolution of 0.5°C (0.5°F). |
|---|---|
| Accuracy | 0.5°C typical (see graph on page 3 of data sheet) |
| Dimensions | 120 x 25 x 22mm (4.72 x 0.98 x 0.86”) |
| Max. Temperature | +80°C (176°F) |
| Min. Temperature | -35°C (-31°F) |
| Power Consumption | Battery life: 2 years (at 25°C and 1 minute logging rate, LCD on) |
| Power Supply | BAT 3V6 1/2AA (included) |
EasyLog Data Logger Setup from Lascar Electronics
Learn about Lascar's standalone data logger. This product is equipped with a LCD screen and ranges of temperature, humidity, dew point and probe data loggers.
